We manufacture galvanized steel window wells in Calgary and ship them to Beaumont, Alberta, at a flat rate, in 213 stock sizes from 36″ to 96″ wide.
Beaumont had a population of 20,779 at the 2021 Census, living in 7,124 private dwellings. At 1,998 people per square kilometre the housing mix leans towards townhouses and smaller lots, so wells here tend to be narrower than the prairie average.
Beaumont grew 19.4% between the 2016 and 2021 censuses. Fast growth means new builds, and new builds mean wells going into fresh excavations rather than replacing rusted steel.
Shipping to Beaumont
Shipping is a flat $189.99 CAD per order to anywhere in Canada, Beaumont included. It is charged once per order rather than per item, so a whole house of wells costs the same to ship as a single one. Allow 2 to 15 business days in transit once the order leaves the plant.
Galvanized stock sizes leave the shop in one to two business days. Gloss black powder coat is finished to order and adds one to two weeks. You are also welcome to collect free of charge from our plant at 7042-30 St SE in Calgary if you are passing through.
Egress and the building code in Alberta
A basement bedroom window has to open to a set size, and a set amount of clear space has to sit in front of it. In Alberta that comes from the Alberta Building Code (NBC 2020 AE), administered through your municipal building department in Beaumont. A 30″ projection gives 762 mm of clearance in front of the window, which clears the 760 mm the national code asks for — but the window has its own opening requirement, so confirm both before you order.
Frost design depth across Alberta runs 1.2 m in the south to 2.4 m in the north. That figure is regional rather than specific to Beaumont, and your building department will tell you what applies on your lot. It matters because the base of the well wants to sit below the level the excavation reaches.
Measuring before you order
Three numbers, in this order. Width runs along the foundation wall and should clear the window opening on both sides. Projection is how far the well stands out from the wall. Height is from finished grade down to where the base will sit. If the hole is already dug, measure the hole rather than the window — and do not copy the well you are removing, because decades in the ground change its dimensions.
Common questions from Beaumont
How much does shipping a window well to Beaumont cost?
A flat $189.99 CAD per order, the same rate we charge anywhere in Canada. It is charged per order rather than per item, so several wells ship for the price of one. Allow 2 to 15 business days in transit.
What does Beaumont require for a basement bedroom window?
The governing document is the Alberta Building Code (NBC 2020 AE), administered locally through your municipal building department. A 30 inch projection gives 762 mm of clearance in front of the window. The window itself has its own opening requirement, so confirm both before you order.
Can I get a size that is not listed?
Yes. We manufacture in our own shop, so any width, projection or height is possible. Send the three measurements and we will quote it for delivery to Beaumont.
Do you deliver to Beaumont?
Yes. We ship to every province and territory in Canada. Delivery is curbside on a liftgate truck, so somebody needs to be there to receive it.
Population and dwelling figures are from the 2021 Census of Population, Statistics Canada table 98-10-0011-01. Code references are general guidance, not a ruling on your property — Alberta Municipal Affairs and your local building department in Beaumont set what actually applies.