Red Deer sits on prairie clay that swells when it takes on water and shrinks when it dries. That movement is what pushes a badly drained window well out of square over a few winters, and it is the reason the base of the well matters as much as the steel.
What shapes a window well in Red Deer is a housing stock that expanded fast through the 1970s and 80s, so a lot of original wells are now rusting out. It is roughly 145 km by road from our plant to Red Deer, and delivery there takes 2 to 15 business days.
Nothing here is drop-shipped. Wells bound for Red Deer are rolled, corrugated and flanged in our Calgary plant, then either collected or put on a truck the same week.
What it costs to ship to Red Deer
Freight anywhere in Canada is $189.99 CAD, charged once per order rather than per item, with transit of 2 to 15 business days after the build time. Galvanized sizes leave the shop in one to two business days; gloss black powder coat is finished to order and adds one to two weeks.
Backfill and drainage
Use clear crushed stone against the well rather than the clay you dug out. Clay packed back against the steel holds water where you least want it. Deeper installations usually tie the base into weeping tile.
Height and grade
Set the well so the lip finishes at or just above grade, then slope the ground away from the foundation. On Red Deer lots that slope is often the only thing keeping meltwater out of the well.
Getting the three numbers right
Width first, along the wall, with clearance past the opening on each side. Then projection, straight out from the foundation. Then height, from finished grade to the base of the excavation. An existing hole governs the size more than the window does, so measure the hole if there is one.
If you are replacing rather than installing new, measure the window and the excavation, not the existing steel. Decades in the ground change a well's dimensions.
Common questions from Red Deer
How much does shipping a window well to Red Deer cost?
Freight anywhere in Canada is $189.99 CAD per order, not per item, and transit runs 2 to 15 business days on top of the build time. Because it is charged per order, several wells ship for the same price as one.
What does Red Deer require for a basement bedroom window?
The governing document is the Alberta Building Code (NBC 2020 AE), administered locally through your municipal building department. A 30 inch projection gives 762 mm of clearance in front of the window. The window itself has its own opening requirement, so confirm both before you order.
Can I get a size that is not listed?
Yes. We manufacture in our own shop, so any width, projection or height is possible. Send the three measurements and we will quote it for delivery to Red Deer.
How deep should a window well be in Red Deer?
Deep enough that the base sits below the level the excavation reaches, with the lip finishing at grade. Frost design depth here is around 1.5 m, close to the national norm, so a standard height usually works. Measure from finished grade down to where the base will actually sit, not from the window.
Treat this as orientation rather than a code interpretation. Alberta Municipal Affairs and your local building department in Red Deer set what actually applies to your build.