Frost reaches 1.8 m in Sudbury, which is deeper than most of the country and deep enough that it governs the whole installation. A well that stops short of the frost line will be lifted by the ground underneath it sooner or later.
What shapes a window well in Sudbury is shallow soil over bedrock, so excavations are often limited by rock rather than frost. It is roughly 3,120 km by road from our plant to Sudbury, which is why freight runs $324.00 CAD and transit 2 to 15 business days.
The steel arrives at our Calgary shop as flat coil and leaves as a finished well. That is why Sudbury orders skip the distributor markup, and why an odd size is a quote rather than a refusal.
Delivery to Sudbury
A Sudbury order ships for $324.00 CAD regardless of how many wells are on it, arriving in 2 to 15 business days. Stock galvanized sizes go out within one to two business days. Powder coated wells are finished to order, which adds one to two weeks before dispatch.
Working with a 1.8 m frost line
The practical consequence is depth. Excavations here go deep, which usually means a taller well than the same window would take further south, and often two wells stacked where the drop exceeds the tallest single height we roll.
Stacking for depth
Where the drop is deeper than 42 inches, two wells of matching width and projection fasten together. Order both and say so in the order notes so we can match the flanges.
How to measure the opening
Run the tape along the foundation past both sides of the window for width. Measure straight out from the wall for projection. Measure down from finished grade to where the base will sit for height. Where the excavation already exists, its dimensions are the ones that matter.
If you are replacing rather than installing new, measure the window and the excavation, not the existing steel. Decades in the ground change a well's dimensions.
Common questions from Sudbury
What does Sudbury require for a basement bedroom window?
The governing document is the Ontario Building Code, administered locally through your municipal building department. A 30 inch projection gives 762 mm of clearance in front of the window. The window itself has its own opening requirement, so confirm both before you order.
Can I get a size that is not listed?
Yes. We manufacture in our own shop, so any width, projection or height is possible. Send the three measurements and we will quote it for delivery to Sudbury.
How deep should a window well be in Sudbury?
Deep enough that the base sits below the level the excavation reaches, with the lip finishing at grade. At around 1.8 m, frost design depth here is well above the national norm, so excavations tend to be deeper and the well taller than the same window would need further south. Measure from finished grade down to where the base will actually sit, not from the window.
How much does shipping a window well to Sudbury cost?
Freight to Ontario is $324.00 CAD per order, not per item, and transit runs 2 to 15 business days on top of the build time. Because it is charged per order, several wells ship for the same price as one.
The numbers above reflect the national code and common local practice. They are not a ruling on your property. Your building department in Sudbury, working under Ontario Ministry of Municipal Affairs and Housing, has the final say.