Frost is barely a factor in Surrey at 0.3 m. Water is. The wells that fail here fail because the base silted up and the excavation turned into a sump against the foundation, not because anything froze.
What shapes a window well in Surrey is newer subdivisions on flat, high-water-table ground where drainage is the whole problem. It is roughly 986 km by road from our plant to Surrey, and delivery there takes 2 to 15 business days.
The steel arrives at our Calgary shop as flat coil and leaves as a finished well. That is why Surrey orders skip the distributor markup, and why an odd size is a quote rather than a refusal.
Getting one to Surrey
Freight anywhere in Canada is $189.99 CAD, charged once per order rather than per item, with transit of 2 to 15 business days after the build time. Galvanized sizes leave the shop in one to two business days; gloss black powder coat is finished to order and adds one to two weeks.
Drainage is the whole job
A gravel base with somewhere for water to go, ideally tied into weeping tile. In Surrey the failure mode is a well that fills faster than it drains and holds water against the frame until the sill rots.
Covers earn their keep here
A cover with a clear polycarbonate sheet keeps the rain out while still passing daylight. On this coast that is the difference between a dry well and a standing one.
What to measure, and in what order
Width along the wall, projection out from it, height down from grade. Those three, in that order, are how every product on this site is named. If the excavation is open, take the numbers from the hole.
Measure the opening rather than the old well. A well that has been in Surrey ground for twenty years has usually settled or spread, and copying its dimensions repeats whatever was wrong with it.
Common questions from Surrey
How much does shipping a window well to Surrey cost?
Freight anywhere in Canada is $189.99 CAD per order, not per item, and transit runs 2 to 15 business days on top of the build time. Because it is charged per order, several wells ship for the same price as one.
What does Surrey require for a basement bedroom window?
The governing document is the BC Building Code, administered locally through your municipal building department. A 30 inch projection gives 762 mm of clearance in front of the window. The window itself has its own opening requirement, so confirm both before you order.
How deep should a window well be in Surrey?
Deep enough that the base sits below the level the excavation reaches, with the lip finishing at grade. At around 0.3 m, frost design depth here is among the shallowest in the country, so depth is usually set by the window and the grade rather than by frost. Measure from finished grade down to where the base will actually sit, not from the window.
Do you deliver to Surrey?
Yes. We ship to every province and territory in Canada. Delivery is curbside on a liftgate truck and somebody needs to be there to receive it.
The numbers above reflect the national code and common local practice. They are not a ruling on your property. Your building department in Surrey, working under BC Building and Safety Standards Branch, has the final say.